Replacing Chevy Battery.
The electrical box is on top of the old battery,it has to be removed.
The battery is located under hood.
Shift the van into park and set the parking brake. Turn the engine off and remove the keys from the ignition. Pop the hood.
CAUTION: Batteries generate hydrogen gas, which is extremely flammable and may explode violently if ignited by a spark or a flame.
Battery acid is extremely corrosive and causes severe personal injury if the acid comes into contact with the skin, and blindness if the acid comes into contact with the eyes.
In order to avoid severe personal injury, use extreme caution when servicing the battery or battery-related components.
IMPORTANT: Do not tip the battery more than 40 degrees.
BATTERY REPLACEMENT
Removal Procedure
1. Remove and reposition the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Replacement in Wiring Systems.
2. Remove the front end sheet metal diagonal brace.
3. Remove the battery ground (negative) cable from the battery .
4. Remove the battery positive cable from the battery .
5. Remove the battery hold down retainer.
6. Remove the battery .
7. Remove the battery insulator from the battery .
UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT
Removal Procedure
1. Open and support the hood.
2. Remove the cover from the underhood electrical center.
3. Remove the bolt retaining the underhood electrical center to the upper tie bar.
4. Rotate and remove the electrical center from the right sheet metal diagonal brace.
5. Remove the right sheet metal diagonal brace.
6. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure
Engine Electrical.
7. Remove the nut (1) retaining the positive battery cable to the underhood electrical center.
8. Remove the positive battery cable lead (2) from the stud.
9. Remove the lower cover from the underhood electrical center.
10. Disconnect the electrical connectors from the underhood electrical center.
11. Remove the underhood electrical center.
Reverse to reinstall.
The Diagrams to help you are shown below:-----
For All types of Car models and brands help
Go to Newly Launched
FREE Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html
&
Complete Car repair Help FREE?
http://repairhelpcenter.blogspot.in/2012/03/complete-car-repair-help.html
The electrical box is on top of the old battery,it has to be removed.
The battery is located under hood.
Shift the van into park and set the parking brake. Turn the engine off and remove the keys from the ignition. Pop the hood.
CAUTION: Batteries generate hydrogen gas, which is extremely flammable and may explode violently if ignited by a spark or a flame.
Battery acid is extremely corrosive and causes severe personal injury if the acid comes into contact with the skin, and blindness if the acid comes into contact with the eyes.
In order to avoid severe personal injury, use extreme caution when servicing the battery or battery-related components.
IMPORTANT: Do not tip the battery more than 40 degrees.
BATTERY REPLACEMENT
Removal Procedure
1. Remove and reposition the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Replacement in Wiring Systems.
2. Remove the front end sheet metal diagonal brace.
3. Remove the battery ground (negative) cable from the battery .
4. Remove the battery positive cable from the battery .
5. Remove the battery hold down retainer.
6. Remove the battery .
7. Remove the battery insulator from the battery .
UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT
Removal Procedure
1. Open and support the hood.
2. Remove the cover from the underhood electrical center.
3. Remove the bolt retaining the underhood electrical center to the upper tie bar.
4. Rotate and remove the electrical center from the right sheet metal diagonal brace.
5. Remove the right sheet metal diagonal brace.
6. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure
Engine Electrical.
7. Remove the nut (1) retaining the positive battery cable to the underhood electrical center.
8. Remove the positive battery cable lead (2) from the stud.
9. Remove the lower cover from the underhood electrical center.
10. Disconnect the electrical connectors from the underhood electrical center.
11. Remove the underhood electrical center.
Reverse to reinstall.
The Diagrams to help you are shown below:-----
UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK
UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK
Battery Cable location for Chevy Venture:
Lower Electrical cover Shown.
This details will help.
Thanks.
