If the injectors are having no pulse,then there are few possibilities,that can cause this.
Faulty injector controlling module.
Problem with Pickup coil.
Check the resistance of the injectors,it should show Approx 14.7.
If the injectors seems hot,but there is no pulse to injector,then its computer related issue.
If you have power to the injectors and no pluse then you most likely have a bad PCM (computer) the injectors are fired by the driver in the PCM thru ground switching.
How to Test and Replace Fuel Injectors on Acura Car Models?
http://repairhelpcenter.blogspot.com/2011/11/how-to-test-and-replace-fuel-injectors.html
How to remove Intake Manifold Tuning Valve?
http://technoanswers.blogspot.com/2012/01/how-to-remove-intake-manifold-tuning.html
CMFI details for GMC vehicles?
http://technoanswers.blogspot.com/2012/01/cmfi-details-for-gmc-vehicles.html
Mazda MPV cranks but will not start?
MAZDA MPV WILL CRANK BUT NOT TURN OVER TO START?
http://technoanswers.blogspot.com/2012/01/mazda-mpv-will-crank-but-not-turn-over.html
Freightliner fl112 fuse box diagram?
http://technoanswers.blogspot.com/2012/01/freightliner-fl112-fuse-box-diagram.html
Car will not turn the ignition to start?
http://technoanswers.blogspot.com/2012/01/car-will-not-turn-ignition-to-start.html
Car only starts when gas pedal is pressed?
http://technoanswers.blogspot.com/2012/01/car-only-starts-when-gas-pedal-is.html
Hyundai coupe f2 hazard fault?
http://schematicsdiagram.blogspot.com/2012/01/hyundai-coupe-f2-hazard-fault.html
Where is the bulb located in glove box?
http://repairhelpcenter.blogspot.com/2012/01/where-is-bulb-located-in-glove-box.html
Additional wiring harness needs to be installed in a brake controller for electric brakes on 2012
http://repairhelpcenter.blogspot.com/2012/01/additional-wiring-harness-needs-to-be.html
Fail smog test due to gas filter hose?
http://repairhelpcenter.blogspot.com/2012/01/fail-smog-test-due-to-gas-filter-hose.html
Clutch squeaking under hood?
http://repairhelpcenter.blogspot.com/2012/01/clutch-squeaking-under-hood.html
Replace door stay assemblies on
http://repairhelpcenter.blogspot.com/2012/01/replace-door-stay-assemblies-on-toyota.html
Acceleration lag problem?
http://repairhelpcenter.blogspot.com/2012/01/acceleration-lag-problem.html
How to Replace rear quarter glass on
http://repairhelpcenter.blogspot.com/2012/01/how-to-replace-rear-quarter-glass-on.html
Overdrive light in the dash blinks?
http://repairhelpcenter.blogspot.com/2012/01/overdrive-light-in-dash-blinks.html
Faulty injector controlling module.
Problem with Pickup coil.
Check the resistance of the injectors,it should show Approx 14.7.
If the injectors seems hot,but there is no pulse to injector,then its computer related issue.
If you have power to the injectors and no pluse then you most likely have a bad PCM (computer) the injectors are fired by the driver in the PCM thru ground switching.
The PCM also known as power control module.It has to be inspected and replaced.
This details will help.
Thanks.
See below latest related solved car problems :----
How to Test and Replace Fuel Injectors on Acura Car Models?
http://repairhelpcenter.blogspot.com/2011/11/how-to-test-and-replace-fuel-injectors.htmlHow to Replace a Fuel Injector
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-fuel-injector.html