@

@

Friday, January 27, 2012

How to Adjust and replace Brake Shoes on Kia Sportage?

Check out both the details for adjustment and for replacing brake shoes on Kia sportage.

The details are mentioned below :-----


Adjustment



  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Raise and safely support the vehicle.
  3. Remove the rear wheels.
  4. Apply the parking brake.
  5. Remove the 4 attaching nuts.
  6. Release the parking brake and remove the brake drum.
  7. Using a brake caliper, measure the brake shoe diameter at the widest point.
  8. Using a brake caliper, measure the brake drum diameter at the widest point.
  9. Calculate the clearance by subtracting the shoe diameter from the drum diameter. The shoe-to-drum clearance should be 0.020 - 0.040 inch
  10. Adjust the shoe-to-drum clearance by turning the star wheel on the adjusting assembly until proper clearance is achieved.
  11. Install the brake drum.
  12. Apply the parking brake and install the four drum retaining nuts.
  13. Release the parking brake.
  14. Install the rear wheels.
  15. Lower the vehicle.

    Click image to see an enlarged view
    Fig. Measure for proper drum-to-shoe clearance as shown

Removal & Installation



  1. Raise and safely support the vehicle.
  2. Remove the rear wheels.
  3. Apply the parking brake.
  4. Remove the 4 attaching nuts.
  5. Release the parking brake and remove the brake drum.
  6. Remove the spring from the secondary shoe to the adjusting lever.
  7. Remove the adjusting lever.
  8. Remove the return spring above the star adjusting wheel.
  9. Turn the starwheel clockwise to relieve tension on the brake shoes.
  10. Remove the starwheel.
  11. Remove the hold-down pin clips.
  12. Remove the primary shoe.
  13. Disconnect the C-clip and pin attaching the parking brake lever to the secondary brake shoe.
To install:
  1. Lubricate the backing plate contact points.
  2. Connect the parking brake lever to the secondary brake shoe.
  3. Attach the primary and secondary brake shoes to the backing plate.
  4. Install the starwheel.
  5. Install the return spring above the starwheel.
  6. Install the adjusting lever.
  7. Install the spring from the secondary shoe to the adjusting lever. Be sure the lever contacts the starwheel.
  8. Install the brake drum and retaining nuts.
  9. Adjust the rear brakes through the slot in the rear of the backing plate.
  10. Install the wheels. Tighten the wheel lugs to 77 ft. lbs. (99 Nm).
  11. Lower the vehicle.
    12. Click image to see an enlarged view
    Fig. Exploded view of the rear drum brake assembly-Sportage
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Raise and safely support the vehicle.
  3. Remove the rear wheels.
  4. Apply the parking brake.
  5. Remove the 4 attaching nuts.
  6. Release the parking brake and remove the brake drum.
  7. Remove the spring from the secondary shoe to the adjusting lever.
  8. Remove the adjusting lever.
  9. Remove the return spring above the star adjusting wheel.
  10. Turn the starwheel clockwise to relieve tension on the brake shoes.
  11. Remove the starwheel.
  12. Remove the hold-down pin clips.
  13. Remove the primary shoe.
  14. Disconnect the C-clip and pin attaching the parking brake lever to the secondary brake shoe.
To install:
  1. Lubricate the backing plate contact points.
  2. Connect the parking brake lever to the secondary brake shoe.
  3. Attach the primary and secondary brake shoes to the backing plate.
  4. Install the starwheel.
  5. Install the return spring above the starwheel.
  6. Install the adjusting lever.
  7. Install the spring from the secondary shoe to the adjusting lever. Be sure the lever contacts the starwheel.
  8. Install the brake drum and retaining nuts.
  9. Adjust the rear brakes through the slot in the rear of the backing plate.
  10. Install the wheels. Tighten the wheel lugs to 77 ft. lbs. (99 Nm).
  11. Lower the vehicle.

    Click image to see an enlarged view
    Fig. Exploded view of the rear drum brake assembly
Sportage
  1. Raise and safely support the vehicle.
  2. Remove the rear wheels.
  3. Apply the parking brake.
  4. Remove the 4 attaching nuts.
  5. Release the parking brake and remove the brake drum.
  6. Remove the spring from the secondary shoe to the adjusting lever.
  7. Remove the adjusting lever.
  8. Remove the return spring above the star adjusting wheel.
  9. Turn the starwheel clockwise to relieve tension on the brake shoes.
  10. Remove the starwheel.
  11. Remove the hold-down pin clips.
  12. Remove the primary shoe.
  13. Disconnect the C-clip and pin attaching the parking brake lever to the secondary brake shoe.
To install:
  1. Lubricate the backing plate contact points.
  2. Connect the parking brake lever to the secondary brake shoe.
  3. Attach the primary and secondary brake shoes to the backing plate.
  4. Install the starwheel.
  5. Install the return spring above the starwheel.
  6. Install the adjusting lever.
  7. Install the spring from the secondary shoe to the adjusting lever. Be sure the lever contacts the starwheel.
  8. Install the brake drum and retaining nuts.
  9. Adjust the rear brakes through the slot in the rear of the backing plate.
  10. Install the wheels. Tighten the wheel lugs to 77 ft. lbs. (99 Nm).
  11. Lower the vehicle.

    Click image to see an enlarged view
    Fig. Exploded view of the rear drum brake assembly-Sportage



This should help.
Thanks.

Also see more help solutions below :----


Car dies when gas pedal is pressed?

http://schematicsdiagram.blogspot.com/2011/12/car-dies-when-gas-pedal-is-pressed.html

Low idle when cold out side?

http://repairhelpcenter.blogspot.com/2011/12/low-idle-when-cold-out-side.html

MAF, IAT, MAP and Coolant Level Sensor problem all together on Mazda MPV?

http://schematicsdiagram.blogspot.com/2011/12/maf-iat-map-and-coolant-level-sensor.html

GMC Engine Coolant Temperature (ECT) Sensor Replacing?

http://schematicsdiagram.blogspot.com/2011/12/gmc-engine-coolant-temperature-ect.html

Coolant temperature sensor dies again and again?

http://schematicsdiagram.blogspot.com/2012/01/coolant-temperature-sensor-dies-again.html

GMC Idle Air Control (IAC) Valve Replacing?

http://schematicsdiagram.blogspot.com/2011/12/gmc-idle-air-control-iac-valve.html

Car Surging?

http://schematicsdiagram.blogspot.com/2011/12/car-surging.html

EVAP connecting hose to PCV valve Collapse?

http://schematicsdiagram.blogspot.com/2012/01/evap-connecting-hose-to-pcv-valve.html

How to replace a distributor on Chevrolet Camaro?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-distributor-on-chevrolet.html

Cadillac Seville Digital Dash Display not working?

http://schematicsdiagram.blogspot.com/2011/12/cadillac-seville-digital-dash-display.html

Can car radio code block Passkey anti theft system ?

http://schematicsdiagram.blogspot.com/2011/12/can-car-radio-code-block-passkey-anti.html

Toyota Avalon Factory Alarm will go off?

http://repairhelpcenter.blogspot.com/2012/01/toyota-avalon-factory-alarm-will-go-off.html

Rear oil seal leaking?

http://schematicsdiagram.blogspot.com/2011/12/rear-oil-seal-leaking.html

Car water leak around the Starter area and Bell Housing?

http://schematicsdiagram.blogspot.com/2011/12/car-water-leak-around-starter-area-and.html

Where are TPS and IAC Located on Ford Escort?

http://schematicsdiagram.blogspot.com/2011/12/where-is-tps-and-iac-located-on-ford.html

Front tires leaning IN?

http://schematicsdiagram.blogspot.com/2011/12/front-tires-leaning-in.html

Where is Vent fan located on Chevrolet Impala?

http://schematicsdiagram.blogspot.com/2011/12/where-is-vent-fan-located-on-chevrolet.html

1982 dodge rampage Spark plugs Firing Order Diagram?

http://schematicsdiagram.blogspot.com/2011/12/1982-dodge-rampage-spark-plug-firing.html

Engine Misfire codes on Chevrolet Malibu?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

2006 Suzuki Forenza Spark plug Firing Order Diagram?

http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html

Chevrolet Tahoe Hood open warning on dash and alarm sounds?

http://schematicsdiagram.blogspot.com/2011/12/chevrolet-tahoe-hood-open-warning-on.html

How to wire new Radio on 1990 Toyota Celica?

http://schematicsdiagram.blogspot.com/2011/12/how-to-wire-new-radio-on-1990-toyota.html

Valve clearance details for Toyota 2.0 rav4?

http://schematicsdiagram.blogspot.com/2011/12/valve-clearance-details-for-toyota-20.html

Where is the EGR feedback sensor located on 2004 Ford Explorer ?

http://schematicsdiagram.blogspot.com/2011/12/where-is-egr-feedback-sensor-located-on.html

How to wire toggle switch to Push button on Chevrolet Camaro?

http://schematicsdiagram.blogspot.com/2011/12/how-to-wire-toggle-switch-to-push.html

Emissions schematic Diagram For 1984 Chevy K10 silverado 305 engine

http://schematicsdiagram.blogspot.com/2011/12/emissions-schematic-diagram-for-1984.html


Labels: how to adjust brake shoes on kia, kia brake shoes replacing procedure, remove brake shoes on kia sportage

@

@