Open the glove compartment and remove any items contained inside. Place one hand on each side of the box, toward the very top, and press in with firm pressure until the box pops out, making the ECU visible.
Remove the ECU bracket using a socket wrench. Reach behind the unit, depress the plastic tab on the wiring harness and pull straight back to unplug it. Remove the ECU.
Install the replacement ECU by reversing the steps used to remove the old one. Ensure the bracket is tight and the wiring harness is pressed completely into the socket. Close the glove box, pressing in on the sides again to snap it back into place.
Make sure the ignition is turned off before beginning.
To Order car parts online:--To get heavy discount on car parts .Click this link below:----
http://technoanswers.blogspot.com/2011/05/from-where-to-order-car-parts-online.html
For car error code diagnosis click the link below:---
http://www.automd.com/diagnose/?amdcid=apwldrbrd1
Car no start:--
http://technoanswers.blogspot.com/2011/05/car-will-turn-over-but-will-not-start.html