Left Manifold
- Before servicing the vehicle, refer to the Precautions Section.
- Remove or disconnect the following:Negative battery cableHeated Oxygen (HO 2 S) sensor and catalyst monitorSplash shieldExhaust crossover pipeDrive belt-2005-07 modelsA/C compressor and move it aside-2005-07 modelsExhaust manifold and discard the gasket
To install:
- Clean the sealing surfaces of any old gasket material.
- Install or connect the following:Exhaust manifold and new gasket. Torque the bolts to 15 ft. lbs. (20 Nm).A/C compressor-2005-07 models. Torque the bolts to 18 ft. lbs. (20 Nm).Drive belt-2005-07 modelsExhaust crossover pipe. Torque the bolts to 30 ft. lbs. (40 Nm).Splash shield. Torque the bolts to 80 inch lbs. (9 Nm).Left side HO 2 S sensor and catalyst monitorNegative battery cable
- Start the vehicle and check for leaks, repair if necessary.
- Before servicing the vehicle, refer to the Precautions Section.
- Remove or disconnect the following:Negative battery cableExhaust Gas Recirculation (EGR) tubeAlternatorRight side Heated Oxygen (HO 2 S) sensorRight side exhaust manifold and discard the gasket
To install:
- Clean the sealing surfaces of any old gasket material.
- Install or connect the following:Exhaust manifold and new gasket. Torque the bolts to 15 ft. lbs. (20 Nm).Right side HO 2 S sensorAlternatorEGR tubeNegative battery cable
- Start the vehicle and check for leaks, repair if necessary.
----------------
To Order car parts online:--To get heavy discount on car parts .Click this link below:----
http://technoanswers.blogspot.com/2011/05/from-where-to-order-car-parts-online.html
For car error code diagnosis click the link below:---
http://www.automd.com/diagnose/?amdcid=apwldrbrd1
Car no start:--
http://technoanswers.blogspot.com/2011/05/car-will-turn-over-but-will-not-start.html