Inside the faceplace near the bottom left, there's a little recessed push button. Remove the faceplace and with a straightened out paper clip, tip of a ball point pen, or similar object, press the button for about 1-2 seconds. Then go into the "audio settings" and set POWER IC to POW ON. If this fails to work, the unit is probably defective.
Amps have loaded down the battery/alternator system so heavy the head unit has detected a low dc voltage which prompted the dc error reading.
What to do? I think you must reset the head unit. Afterwards you may need to put in a heavy duty battery and alternator since you are sucking up lots of power from the car's electrical system with all those amps connected.
Reset will require the 12v battery line to be removed from the head unit for at least 20 minutes before powering it back up.
----------------
To Order car parts online:--To get heavy discount on car parts .Click this link below:----
http://technoanswers.blogspot.com/2011/05/from-where-to-order-car-parts-online.html
For car error code diagnosis click the link below:---
http://www.automd.com/diagnose/?amdcid=apwldrbrd1
Car no start:--
http://technoanswers.blogspot.com/2011/05/car-will-turn-over-but-will-not-start.html