Slide the small flat head screwdriver into the tape deck and underneath the tape.
Insert the needle-nose pliers into the tape deck and grab hold of the end of the tape.
Lift up with the screwdriver as you pull out gently with the pliers.
Wiggle slightly as you pull the tape back.
Look at your car manual for how to remove the tape deck from the dashboard if needed to get the tape out of the deck. Typically, the covering of center dash display can be popped open and removed without any tools.
Pull the tape deck free and unplug the cables connected to its backside.
Use a Philips screwdriver on the outside screws holding the top of the tape deck's casing to the bottom. Remove these screws and lift open the top of the tape deck. Pull out and remove the tape.
Reassemble the tape deck and reconnect it to the wiring. Place it back into the center dash and snap the pieces back into place.
--------
Take the deck out of the dash then take the cover off the deck..
it should be simple after that.
Take the stereo out of the dash and open up the case and then try to click the release mechanism inside that will make it pop out.If you dont know what youre doing just take it to a car stereo or electronics store and have them remove the adapter for you.
