@

Thursday, October 13, 2011

How to replace blower motor on Buick regal?

PLEASE HELP.


I NEED TO REPLACE BLOWER MOTOR FOR MY BUICK REGAL.
ITS 1999 YEAR MODEL.
GIVE ME DETAILS AND DIAGRAMS TO REPLACE BLOWER MOTOR.
----------
OK.


To replace blower motor, the dash has to be removed, for dash removing procedure,click the link below.

How to replace instrument panel on Buick regal?


http://schematicsdiagram.blogspot.com/2011/10/how-to-replace-instrument-panel-on.html


The blower motor removing procedure is as follows :---
First read the blower motor replacing procedure, then click the link for dash removal:---




BLOWER MOTOR:---

Removal & Installation


  1. Disconnect the negative battery cable.
  2. The blower motor is located on the passenger side of the vehicle, under the instrument panel. Remove the right side sound insulator (trim panel) by removing the retainers and disconnecting the courtesy lamp.
  3. Detach the blower motor electrical connector. Some applications may have cooling hose to the motor which should be disconnected.


Click image to see an enlarged view
Fig. Blower motor and fan assembly removal
  1. Unfasten the blower motor mounting screws, then remove the blower motor from the vehicle.
  2. If the blower motor fan (also called a 'squirrel cage') must be replaced, use the following procedure:

NOTE
Do not hammer on the motor to remove or install the fan. Do not apply force to the motor housing to seat the fan on the motor, or motor/shaft bearing damage could result. Do not apply pressure to the fan rim. Be sure the correct replacement part is used.

  1. Remove the metal star clip retaining the fan cage to the motor shaft.
  2. Remove the fan by pulling straight out.
To install:
  1. If removed, install the blower motor fan, as follows:
    1. Install the replacement fan cage onto the motor shaft.
    2. Adjust the fan cage to get a clearance of 0.30 inch (7.5mm) to the motor mount plate.
  2. Install the remaining components in the reverse of the removal procedure. Make sure the electrical connection is secure. Tighten the motor screws to 14 ft. lbs. (20 Nm).
  3. Connect the negative battery cable, then test the blower motor for proper operations



----------
TO KNOW MORE ABOUT ,HOW BLOWER MOTOR WORKS.
CLICK THE LINK BELOW:---

Car Ac blower motor working procedure and details?



@