This procedure will work for
Acura CL Integra NSX RL RSX TL TSX.
Its for 2001 and above car models.
Removal & Installation
EXCEPT FUEL PUMP-MOUNTED FILTERS
FUEL PUMP-MOUNTED FILTER
EXCEPT FUEL PUMP-MOUNTED FILTERS
FUEL PUMP-MOUNTED FILTER
This details will help.
Thanks.
For more help solutions,the help links is below :---
Car repair guide?
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html
Acura CL Integra NSX RL RSX TL TSX.
Its for 2001 and above car models.
Removal & Installation
EXCEPT FUEL PUMP-MOUNTED FILTERS
FUEL PUMP-MOUNTED FILTER
EXCEPT FUEL PUMP-MOUNTED FILTERS
FUEL PUMP-MOUNTED FILTER
Except Fuel Pump-Mounted Filters
- Before servicing the vehicle, refer to the precautions in the beginning of this section.
- Disconnect the negative battery cable.
- Properly relieve the fuel pressure.
- Wrap a shop towel around the filter fittings. Use a properly sized wrench to slowly loosen the fuel line fittings.
- Remove or disconnect the following:
WARNINGIt is very important that ALL of the fuel line banjo bolt washers be replaced every time the banjo bolts are loosened. If the washers are not replaced, the fuel lines will leak pressurized fuel, causing the risk of fire or explosion.
Fuel pipes from the fuel filterFuel filter clampFilter from the vehicle
To install:
- Install or connect the following:
New filter in position and tighten the clamp mounting bolt to 89 inch lbs. (10 Nm)Banjo bolt with new washers and tighten it to 25 ft. lbs. (33 Nm)Fuel feed line and tighten the fitting to 27 ft. lbs. (37 Nm)Negative battery cable and enter the radio security code - Start the vehicle and check for leaks.
Fuel Pump-Mounted Filter
- Before servicing the vehicle, refer to the precautions in the beginning of this section.
- Properly relieve the fuel pressure.
- Remove or disconnect the following:
Negative battery cableFuel pumpFuel filter set
To install:
- Install or connect the following:
Fuel filter set, using a new base gasket and new O-ringsFuel pump. When installing the fuel gauge sending unit, make sure the is secure and the connector is locked into place.Negative battery cable
Except Fuel Pump-Mounted Filters
Fuel Pump-Mounted Filter
- Before servicing the vehicle, refer to the Precautions section.
- Properly relieve the fuel pressure.
- Remove or disconnect the following: Negative battery cableFuel pumpFuel filter set
Negative battery cableFuel pumpFuel filter set
To install:
- Install or connect the following: Fuel filter set, using a new base gasket and new O-ringsFuel pump. When installing the fuel gauge sending unit, make sure the is secure and the connector is locked into place.Negative battery cable
Fuel filter set, using a new base gasket and new O-ringsFuel pump. When installing the fuel gauge sending unit, make sure the is secure and the connector is locked into place.Negative battery cable
This details will help.
Thanks.
For more help solutions,the help links is below :---