@

Showing posts with label replace fuel filter. Show all posts
Showing posts with label replace fuel filter. Show all posts

Monday, March 5, 2012

Fuel filter Replacement procedure for Acura Car models?

This procedure will work for
Acura CL Integra NSX RL RSX TL TSX.
Its for 2001 and above car models.

Removal & Installation
EXCEPT FUEL PUMP-MOUNTED FILTERS
FUEL PUMP-MOUNTED FILTER
EXCEPT FUEL PUMP-MOUNTED FILTERS
FUEL PUMP-MOUNTED FILTER


Except Fuel Pump-Mounted Filters



  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Disconnect the negative battery cable.
  3. Properly relieve the fuel pressure.

    Click image to see an enlarged view
    Fig. Fuel filter assembly
  4. Wrap a shop towel around the filter fittings. Use a properly sized wrench to slowly loosen the fuel line fittings.
  5. Remove or disconnect the following:
    WARNING
    It is very important that ALL of the fuel line banjo bolt washers be replaced every time the banjo bolts are loosened. If the washers are not replaced, the fuel lines will leak pressurized fuel, causing the risk of fire or explosion.



    Fuel pipes from the fuel filter
    Fuel filter clamp
    Filter from the vehicle
To install:
  1. Install or connect the following:

    New filter in position and tighten the clamp mounting bolt to 89 inch lbs. (10 Nm)
    Banjo bolt with new washers and tighten it to 25 ft. lbs. (33 Nm)
    Fuel feed line and tighten the fitting to 27 ft. lbs. (37 Nm)
    Negative battery cable and enter the radio security code
  2. Start the vehicle and check for leaks.

Fuel Pump-Mounted Filter



  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Properly relieve the fuel pressure.
  3. Remove or disconnect the following:

    Negative battery cable
    Fuel pump
    Fuel filter set
To install:
Click image to see an enlarged view
Fig. View of the fuel pump-mounted fuel filter (A)-2.0L engine shown, others similar
  1. Install or connect the following:

    Fuel filter set, using a new base gasket and new O-rings
    Fuel pump. When installing the fuel gauge sending unit, make sure the is secure and the connector is locked into place.
    Negative battery cable

Except Fuel Pump-Mounted Filters



Fuel Pump-Mounted Filter



  1. Before servicing the vehicle, refer to the Precautions section.
  2. Properly relieve the fuel pressure.
  3. Remove or disconnect the following: Negative battery cableFuel pumpFuel filter set

    Negative battery cable
    Fuel pump
    Fuel filter set
To install:


Click image to see an enlarged view
Fig. View of the fuel pump-mounted fuel filter (A)-2.0L engine shown, others similar
  1. Install or connect the following: Fuel filter set, using a new base gasket and new O-ringsFuel pump. When installing the fuel gauge sending unit, make sure the is secure and the connector is locked into place.Negative battery cable

    Fuel filter set, using a new base gasket and new O-rings
    Fuel pump. When installing the fuel gauge sending unit, make sure the is secure and the connector is locked into place.
    Negative battery cable



This details will help.
Thanks.

For more help solutions,the help links is below :---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html


How to replace fuel filter on Acura Car models?

Fuel filter replacing for ACURA MDX ENGINE.

The procedure is same for 2001 and further ACURA MDX car model engines :---
Removal & Installation


  1. Before servicing the vehicle, refer to the precautions section.
  2. Relieve the fuel system pressure.
  3. Remove or disconnect the following:

    Negative battery cable
    Driver-s side second row seat and cut the carpet along the dotted line. Be careful not to cut the wiring harness under the carpet.
    Access panel
    Fuel pump module
  4. Disassemble the fuel pump module and remove the fuel filter. 

    image 
    Fig. Exploded view of the fuel pump module-MDX
To install:
  1. Install the fuel filter and assemble the fuel pump module.
  2. Install or connect the following:

    Fuel pump module
    Access panel
    Carpet and seat
    Negative battery cable
  3. Start the engine and check for leaks.


This details will help.
Thanks.

See below more related help solutions.

Car repair guide With list of car solutions?



@