Monday, March 5, 2012

How to replace Injector Resistor on Acura Car Models?

Please Note This details and procedure are For Acura 1986 to 1993 car models.
Its For Acura Integra,Legend and Vigor car models.

The details are as follows :-----

Injector Resistor


Switch the ignition OFF .
The resistor is located in the engine compartment. On 1986-1990 Legend, it is on the right side firewall; on Vigor and 1991-93 Legends, it is on the left shock tower. On Integra, look for it on the left firewall near the fender. Disconnect the wiring connector to the resistor.
Remove or disconnect any wiring harness clamps or retainers holding the resistor harness.
Remove the retaining bolts holding the resistor; remove the resistor.
Reassemble in reverse order.

See the diagram shown below for its removal and exact location:----

See Figures 1, 2, 3 and 4

Fig. Fig. 1: Injector resistor mounting and testing-Integra

Fig. Fig. 2: Injector resistor mounting and testing-1986-90 Legend


Fig. Fig. 3: Injector resistor mounting and testing-1991-93 Legend

Fig. Fig. 4: Injector resistor mounting and testing-Vigor

This will help.

For more help go to: