Fuel Pump
REMOVAL & INSTALLATION
Removal & Installation
Before servicing the vehicle, refer to the precautions section.
Relieve the fuel system pressure.
Remove or disconnect the following:
Negative battery cable
Driver-s side second row seat and cut the carpet along the dotted line. Be careful not to cut the wiring harness under the carpet.
Access panel
Fuel pump module wiring connector
Fuel supply and return lines
Fuel pump locknut using tool 07AAA-S0XA100
Fuel pump module
To install:
Install or connect the following:
Fuel pump module. Use a new seal and align the matchmarks.
Fuel pump locknut and tighten to 69 ft. lbs. (93 Nm).
Fuel supply and return lines
Fuel pump module wiring connector
Access panel
Carpet and seat
Negative battery cable
Start the engine and check for leaks.
This will help.
Thanks.
For more car help,go to
