Water pump removal instructions for 2003 Ford Focus?

Replacing water pump also requires removal of timing belt,drive accessory belt,timing belt tensioner etc etc.
So please go through this procedures too.Then only it will help you to replace water pump.

Accessory Drive Belt removal on 2003 Ford Focus?

Click the link below:--

http://technoanswers.blogspot.com/2011/10/accessory-drive-belt-removal-on-2003.html

How to remove Timing Belt on 2003 Ford Focus?

Click the link below:--

http://technoanswers.blogspot.com/2011/10/how-to-remove-timing-belt-on-2003-ford.html

Replacing Timing Belt Tensioner on 2003 Ford Focus?

http://technoanswers.blogspot.com/2011/10/replacing-timing-belt-tensioner-on-2003.html

WATER PUMP 

Removal & Installation

2.0L (VIN 3) Engines

1. Before servicing the vehicle, refer to the Precautions Section.
2. Drain the cooling system.
3. Remove or disconnect the following:
   
   
   Negative battery cable

   Accessory drive belt

   Water pump pulley

   Front cover

   Timing belt

   Timing belt tensioner

   Water pump

To install:

1. Install or connect the following:
   
   
   Water pump. Tighten the bolts to 13 ft. lbs. (18 Nm).

   Timing belt tensioner

   Timing belt

   Front cover

   Water pump pulley

   Accessory drive belt

   Negative battery cable
2. Fill the cooling system.
3. Start the engine and check for leaks.

2.0L (VIN N) Engine And 2.3L (VIN Z) Engine

1. Before servicing the vehicle, refer to the Precautions Section.
2. Drain the cooling system.
3. Remove or disconnect the following:
   
   
   Negative battery cable

   Accessory drive belt

   Water pump pulley

   Water pump mounting bolts

   Water pump

To install:

1. Install or connect the following:
   
   
   Water pump with new O-ring. Tighten the bolts to 89 inch lbs. (10 Nm).

   Water pump pulley. Tighten the bolts to 18 ft. lbs. (25 Nm).

   Accessory drive belt

   Negative battery cable
2. Fill the cooling system to the correct level.
3. Start the engine and check for leaks.

1. Before servicing the vehicle, refer to the Precautions Section.
2. Drain the cooling system.
3. Remove or disconnect the following:
   
   
   Negative battery cable

   Accessory drive belt

   Water pump pulley

   Water pump mounting bolts

   Water pump

To install:

1. Install or connect the following:
   
   
   Water pump with new O-ring. Tighten the bolts to 89 inch lbs. (10 Nm).

   Water pump pulley. Tighten the bolts to 18 ft. lbs. (25 Nm).

   Accessory drive belt

   Negative battery cable
2. Fill the cooling system to the correct level.
3. Start the engine and check for leaks.

2.0L (VIN P) Engine

1. Before servicing the vehicle, refer to the Precautions Section.
2. Drain the cooling system.
3. Remove or disconnect the following:
   
   
   Negative battery cable

   Accessory drive belt

   Front cover

   Timing belt

   Timing belt tensioner

   Water pump

To install:

1. Install or connect the following:
   
   
   Water pump. Tighten the bolts to 18 ft. lbs. (25 Nm).

   Timing belt tensioner

   Timing belt

   Accessory drive belt

   Negative battery cable
2. Fill the cooling system.
3. Start the engine and check for leaks.

-------------