@

Showing posts with label fuse. Show all posts
Showing posts with label fuse. Show all posts

Sunday, July 21, 2013

Lexus ES 300 power mirror fuse

Power mirror fuse and wiring diagram

Go through This Link for Fuse Box diagram And Component Locations

2001 Lexus ES 300 power mirror fuse and wiring diagram.

How Replacing The Fuse solved The problem

A/C Problem On Lexus:

Problem Solved:

It was the 10a fuse labeled ECM. I never use my seat memory switch so I did not know there was a problem at that point. My AC light would come on but it has been so cold, I did not realize there was a problem. I did notice that whenever I put the climate control on AUTO MODE that the heat was always directed at the floor but that did not click. I have been told that I had a bad switch and bought a new one to no avail. I was told that I had a bad ground so I took off the panels under the steering wheel and looked and got nothing wrong there. I was at the point of taking it to the dealer. Just to probably be charged for an hours work for a little fuse.Replacing the fuse solved the problem completely.


Friday, May 10, 2013

Dodge Cummins 2500 Has Starting Issues

Dodge Cummins Hard To Start


98 Dodge cummins 24 valve, slow to start. 


  • Batteries seemed weak. 
  • Batteries on long cranks attempting to start. 
  • When vehicle is jump start  heard clicking, then nothing. 
Now, with charged batteries, no sound at all when I turn the key. Both batteries show 12.6 volts. When the key is turned the batteries drop to 11 and change while the grid heater and lift pump run, then pop back to 12+, but no drop when the key is turned to start.

Engine Cranks But Wont Start

For an engine to run, you require three factors to happen within the engine, compression, fuel and ignition, without any one of these factors the engine will not run.

What Is Compression - Engine compression triggered by crankshaft rotation and pistons moving up and down within the engine block. If the timing belt or timing chain fails it will cause the camshaft to become out of connection with the crankshaft or allow the camshaft to stop rotating. Either of these conditions will cause the engine to drop compression and sometimes cause inner engine damage.

Fuel Delivery System - The fuel system includes: fuel pump, fuel injectors, pressure regulator, fuel filter and pressure lines. This system is used to deliver fuel under pressure to the fuel injection system, the shortage of fuel pressure or volume will cause the fuel delivery system to fail and the engine to stall or not start.

Ignition Spark Delivery System - The ignition system components include: spark plugs, spark plug wires, distributor (if applicable), crankshaft angle sensor, camshaft angle sensor, ignition coil, ignition module, knock sensor and PCM (powertrain control module). The engine is dependent on the ignition spark to be delivered to the combustion camber at the appropriate time. If the ignition spark quits or is supplied at the wrong time the engine will not run or run poorly.


Troubleshooting:


Check Starter Relay Fuse

It's very possible that the starter relay fuse blew. When the starters on these trucks started to fail and draw too much current it would cause the fuse to blow, sometimes intermittently at first.

Location Of Starter Relay Control Fuse:

The first thing you'll want to do is check fuse 2 in the power distribution center under the hood and hopefully it's blown. Swap in a known good fuse or check it with an ohm meter if possible if you can't see anything visibly wrong with it.

Confirm Wiring And Fuse Issue:

If it's blown then replace it, remove the small wire from the starter solenoid and turn the key to the crank position. If the fuse doesn't blow this way then you know there isn't a wiring issue, if it blows with the solenoid plugged in but not unplugged then the starter will need to be replaced.


This will help.
Thanks.

ALSO VIEW THIS RELATED:

For Car parts and diagrams:

CAR MANUAL GUIDE
                 
FOR FREE MANUALS AND GUIDES: ---
Car repair guide?


For all types of car repair help:



Car Backfires

For car repair How to guides:


OVERHEATING: Radiator Fan Not Working

Engine Cooling Fan not Working


"Radiator fan"  "Engine Fan"  "COOLING FAN WILL NOT TURN OFF"

LIFT GATE / TAIL GATE ISSUES

TRUNK WILL NOT OPEN


CAR ALARM ISSUES


Car starter removal, Starter motor testing, Starter repairs, Starter solenoid, Starter wiring,


DOOR PANEL REMOVAL, car door panel, door panel components, front door panel, rear door panel,


HEATER CORE REPLACEMENT, HEATER CORE REMOVAL, TROUBLESHOOT HEATER CORE, FLUSH HEATER CORE,

CAR POWER SEAT, ELECTRIC SEAT, POWER SEAT WILL NOT WORK, SEAT WILL NOT GO FORWARD,



For all types of---------

Timing belt routing diagrams for cars and trucks?



                          

==========

For all types of --------

Drive belt routing diagrams for cars and trucks?




stalling issues:
Engine stalls, car stalls while starting, vehicle stalls while starting, Engine stalls and dies, Car stalls and stops,


CRUISE CONTROL Not working, cruise control replacing, troubleshooting cruise control problems,


TRANSMISSION PROBLEMS:

NO REVERSE ON TRANSMISSION

GEAR SHIFT ISSUES

Transmission fluid leak, transmission gears slip,


TRANSMISSION REPLACING AND TROUBLESHOOTING, INSPECTING TRANSMISSION COMPONENTS, TRANSMISSION FAILURES, OD WARNING LIGHT,


TRANSMISSION FLUID FILLING, WHERE TO FILL TRANSMISSION FLUID, AUTOMATIC TRANSMISSION FLUID, NO TRANSMISSION DIPSTICK,


WINDSHIELD WIPERS, WINDSHIELD WIPERS NOT WORKING,WIPER MOTOR MAKING NOISE,NO WIPERS,WIPER FLUID LEAKS,WIPER FUSE AND RELAY,


COOLANT LEAK ISSUES, COOLANT LEAK PROBLEMS, COOLANT SENSOR, LOW COOLANT,


BRAKE LIGHTS NOT WORKING, REPAIRING BRAKE LIGHTS, NO BRAKE LIGHTS,


CHECK ENGINE LIGHT,ENGINE WARNING LIGHT FLASHING,ENGINE LIGHT ON DASH,DASHBOARD WARNING LIGHT,ECM ERROR CODES,


DASHBOARD WARNING LIGHTS ARE ON, ENGINE LIGHT ON DASH,WARNING LIGHTS STEADY ON DASH,RESET DASH BOARD WARNING INDICATOR,


KEYFOB PROGRAMMING, REPROGRAMMING CAR KEY, KEYLESS ENTRY RESET,ANTITHEFT WILL NOT LET CAR TO START, ANTI THEFT ISSUES, KEYFOB NOT WORKING, KEYLESS ENTRY QUIT WORKING,


IGNITION KEY WILL NOT RELEASE, IGNITION KEY STUCK UP, KEY WILL NOT COME OUT OF IGNITION, FAULTY IGNITION KEY LOCK CYLINDER, REPLACING IGNITION CYLINDER,


HEATER ISSUES:

HEATER NOT BLOWING COLD,NO HOT AIR FROM HEATER,A/C BLOWS HOT AIR,A/C NOT BLOWING COLD, COLD AIR FROM HEATER,BLEND DOOR ACUTATOR CLOSED,HVAC UNIT NOT OPERATING,



HEATER NOT BLOWING COLD,NO HOT AIR FROM HEATER,A/C BLOWS HOT AIR,A/C NOT BLOWING COLD, COLD AIR FROM HEATER,BLEND DOOR ACUTATOR CLOSED,HVAC UNIT NOT OPERATING,



STEERING ISSUES:

POWER STEERING TROUBLESHOOTING, STEERING SQUEAKS, POWER STEERING FLUID LEAKS, FAULTY POWER STEERING PUMP, POWER STEERING NOT WORKING, POWER STEERING BELT,



VEHICLE STARTING ISSUE:

CAR NO START: ENGINE NOT TURNING OVER:

Saturday, May 4, 2013

Jeep Grand Cherokee Tailgate Window Will Not Open

TailGate Window Failure


Tailgate Works But Tailgate Window Will Not open


1998 Jeep grand Cherokee tsi: tailgate window button tested ok, tested plunger its good, the tailgate itself works fine auto and manual .
It seems there is no power to window switch. All other windows and doors work ok.


Troubleshooting:

First of all there is a separate fuse for this check that. The fuse for the liftgate glass solenoid is fuse 8 in the junction block, the fuse box inside. Let's start by checking the fuse.

If fuse is faulty blown,then replace the fuse with good one.
If fuse checked out ok then power to the solenoid has to be checked.

There are a couple things involved in powering the release solenoid.

First understand its theory.
Power leaves the fuse and travels to first to the liftgate latch. There is a limit switch in the liftgate latch that prevents the glass from opening while the liftgate is open. The limit switch has to be closed for power to flow to the switch.

So first check for power right at the release solenoid. You can either work from inside with the liftgate closed or you can open it and then use a screwdriver to close the latch pawl so it thinks that the gate is actually shut.

TESTING THE LIFTGATE WINDOW RELEASE SOLENOID:

To test you will need voltmeter or test light.
Either way, unplug the release solenoid and use a test light or voltmeter to check for power on the orange/brown wire. If you do find power is ok then make sure there is ground on the black wire. If you have tested the solenoid and it works then you're going to be missing power or ground, power is more likely.


TESTING THE LIFTGATE WINDOW RELEASE SWITCH:

If you find there is no power to the solenoid then next go to the release switch. Check for power on the orange/pink wire. If there is power  then check on the orange/brown wire. If there is power coming in on the orange/pink but not leaving on the orange/brown with the switch pressed then you know the switch is bad.


TESTING THE LIFTGATE LATCH:

If there is no power at the orange/pink wire then you'd next need to go to the liftgate latch and check for power on the pink/black wire. The pink/black wire is the one that comes from the fuse. If there is power on the pink/black but not on the orange/pink wire then the switch in the latch is bad.


CONCLUSIONS:

If there is no power on the pink/black wire at the latch then you've got a wiring problem in between the fuse and the latch.


How To Locate Wiring Breakage?

One of the most common places to find wiring breaks is in the boot between the liftgate and the body. This is where the wiring harness from the liftgate runs into the body to connect to the main harness. Each time you open and close the liftgate this wiring flexes and can eventually break.Many a times the wire get pinched and form a crack in between.Also sometimes there is dirt or dust layer got formed inside micro switches and latch assembly and this causes problem in connections and closing.So properly clean this dirty areas and that will definitely help to take care of such issues.

Thanks.


ALSO VIEW THIS RELATED:

For Car parts and diagrams:

CAR MANUAL GUIDE
                 
FOR FREE MANUALS AND GUIDES: ---
Car repair guide?


For all types of car repair help:



Car Backfires

For car repair How to guides:


OVERHEATING: Radiator Fan Not Working

Engine Cooling Fan not Working


"Radiator fan"  "Engine Fan"  "COOLING FAN WILL NOT TURN OFF"

LIFT GATE / TAIL GATE ISSUES

TRUNK WILL NOT OPEN


CAR ALARM ISSUES


Car starter removal, Starter motor testing, Starter repairs, Starter solenoid, Starter wiring,


DOOR PANEL REMOVAL, car door panel, door panel components, front door panel, rear door panel,


HEATER CORE REPLACEMENT, HEATER CORE REMOVAL, TROUBLESHOOT HEATER CORE, FLUSH HEATER CORE,

CAR POWER SEAT, ELECTRIC SEAT, POWER SEAT WILL NOT WORK, SEAT WILL NOT GO FORWARD,



For all types of---------

Timing belt routing diagrams for cars and trucks?



                          

==========

For all types of --------

Drive belt routing diagrams for cars and trucks?




stalling issues:
Engine stalls, car stalls while starting, vehicle stalls while starting, Engine stalls and dies, Car stalls and stops,


CRUISE CONTROL Not working, cruise control replacing, troubleshooting cruise control problems,


TRANSMISSION PROBLEMS:

NO REVERSE ON TRANSMISSION

GEAR SHIFT ISSUES

Transmission fluid leak, transmission gears slip,


TRANSMISSION REPLACING AND TROUBLESHOOTING, INSPECTING TRANSMISSION COMPONENTS, TRANSMISSION FAILURES, OD WARNING LIGHT,


TRANSMISSION FLUID FILLING, WHERE TO FILL TRANSMISSION FLUID, AUTOMATIC TRANSMISSION FLUID, NO TRANSMISSION DIPSTICK,


WINDSHIELD WIPERS, WINDSHIELD WIPERS NOT WORKING,WIPER MOTOR MAKING NOISE,NO WIPERS,WIPER FLUID LEAKS,WIPER FUSE AND RELAY,


COOLANT LEAK ISSUES, COOLANT LEAK PROBLEMS, COOLANT SENSOR, LOW COOLANT,


BRAKE LIGHTS NOT WORKING, REPAIRING BRAKE LIGHTS, NO BRAKE LIGHTS,


CHECK ENGINE LIGHT,ENGINE WARNING LIGHT FLASHING,ENGINE LIGHT ON DASH,DASHBOARD WARNING LIGHT,ECM ERROR CODES,


DASHBOARD WARNING LIGHTS ARE ON, ENGINE LIGHT ON DASH,WARNING LIGHTS STEADY ON DASH,RESET DASH BOARD WARNING INDICATOR,


KEYFOB PROGRAMMING, REPROGRAMMING CAR KEY, KEYLESS ENTRY RESET,ANTITHEFT WILL NOT LET CAR TO START, ANTI THEFT ISSUES, KEYFOB NOT WORKING, KEYLESS ENTRY QUIT WORKING,


IGNITION KEY WILL NOT RELEASE, IGNITION KEY STUCK UP, KEY WILL NOT COME OUT OF IGNITION, FAULTY IGNITION KEY LOCK CYLINDER, REPLACING IGNITION CYLINDER,


HEATER ISSUES:

HEATER NOT BLOWING COLD,NO HOT AIR FROM HEATER,A/C BLOWS HOT AIR,A/C NOT BLOWING COLD, COLD AIR FROM HEATER,BLEND DOOR ACUTATOR CLOSED,HVAC UNIT NOT OPERATING,



HEATER NOT BLOWING COLD,NO HOT AIR FROM HEATER,A/C BLOWS HOT AIR,A/C NOT BLOWING COLD, COLD AIR FROM HEATER,BLEND DOOR ACUTATOR CLOSED,HVAC UNIT NOT OPERATING,



STEERING ISSUES:

POWER STEERING TROUBLESHOOTING, STEERING SQUEAKS, POWER STEERING FLUID LEAKS, FAULTY POWER STEERING PUMP, POWER STEERING NOT WORKING, POWER STEERING BELT,



VEHICLE STARTING ISSUE:

CAR NO START: ENGINE NOT TURNING OVER:


Monday, February 18, 2013

2008 Chrysler town and country mini van: Sliding Door Not Working?

Left Sliding Door Not Working

Chrysler Sliding Door Fuse


First inspect the fuse controlling sliding door.


Left sliding door module is powered by fuse J11 and it's a 30 amp fuse. The fuse box is located under the hood right next to the battery. On the fuse box lid you will see diagram showing all the fuse location numbers. Find J11 on the diagram of the locations and then you can locate the fuse in the box.

Take a look at the fuse and see if it looks ok visually.
Another possibility to check fuse is by voltmeter.If you have a voltmeter you can check continuity of the fuse to make sure it's blown, or you can swap it out with any other 30 amp fuse in the box and then see if the door starts working again. Once in a while a fuse can be broken or blown in a way that's not easy to see by eye, if you test it or swap it with another then you can be sure you've ruled the fuse out.So try it before you are confirm its working or not.

If there is no power at all to the electrically operated sliding door then its faulty fuse.If the fuse is working then it can be faulty sliding door switch or its wiring issue.

These details will help.
Thanks.

DON'T MISS RELATED HELP ARTICLES:


Details for replacing right side slide door light switch on Toyota Sienna?

http://repairhelpcenter.blogspot.com/2012/01/details-for-replacing-right-side-slide.html


Front Door dis-assembly diagram for Toyota car?

Rear Door dis-assembly diagram for Toyota car?

How to test Power door locks?

http://repairhelpcenter.blogspot.in/2012/02/how-to-test-power-door-locks.html


Rear Door will not open

http://whoisbyme.blogspot.in/2012/07/rear-door-will-not-open.html

2000 Toyota Corolla: Rear Door wont open from outside or inside?

http://whatisbyme.blogspot.in/2012/05/2000-toyota-corolla-rear-door-wont-open.html


Saturday, February 9, 2013

Chrysler Lebaron Convertible: Solution For Dash lights Not Working

Illuminating Dash lights Not working


Here;s the details about the car and the problem:
1994 Chrysler Lebaron Convertible And Engine: v6 Mitsubishi

The gauge cluster speedometer in middle, rev/ tacometer on left., and temp/oil pressure/charging meter on left. 
Everything works except the illuminating lights on the dash. 

As  per current details the gauges work all the llights like check engine light turn on. When I use the switch to increase brightness on the illumine lights the map lights turn on but not the dash lights. 

The little center gauge light for miles per gallon is on. 
Also I see radio light on. All the indicator high beam low beam dims bright work. I checked all the fuses.. Only the illumination light on dash dont work.

Also tried checking  inspecting with other known good working cluster board,but problem is exactly the same.
Please Help !!!!!!!!!!

The Troubleshooting Details Are As Follows:----

The issue seems to be very clear.As what you said earlier if the cluster was replaced with a known good one and fuses are ok then its either  headlamp switch problem or a broken wire between the switch and the cluster.
At these stage i suggest  checking for power leaving the switch, if there is none but the fuses are ok then the problem is internal in the switch and it will need to be replaced. If there is power leaving the switch but not making it to the cluster then you know the wire is broken somewhere in the harness.

As per your vehicles model and year mentioned, it says:---

The Schematics diagram is showing the illumination powered by the body control module and all circuits leave the BCM as one wire. If the radio and a/c control head light both are working ok then its clear that the circuit is being powered. 

And about the wires to be checked,you will have to  pull the instrument cluster back out and find the solid orange wire in the black connector, check this one for battery voltage with the lamps turned on.

Also without forget check for ground on the black/orange.



Clients Reply:

Problem Solved:
I Checked ground and its good. There is lots of power. Went back check fuse 8= illumine lights. 5 amp fuse , bad. Replaced 5 amp fuse.And is back to normal.
So it was just a fuse problem. 

Thanks.

Wednesday, February 23, 2011

1988 Toyota Camry fuse box layout?

Toyota Camry Fuse Box


Most of the time when electrical problem occurs in the vehicles computer system.Its advisable to inspect vehicles fuse and relay components.

Every vehicle brand and model has its fuse box at certain location.To know exact location for 1988 Toyota Camry fuse box follow the fuse box details and diagrams mentioned below:


Dashboard Component Location Details For Toyota Camry Car Model


Toyota Camry Dashboard

Junction Box 1,2,3 And 4 shows What fuse and relay are located in each junction box.
Please view first image to see which junction box is located where in the dashboard section.

Please Note Junction box 2 is located under hood and not in the dashboard section.

J/B NO.1
Toyota camry fuse box and relay location
J/B NO.3 and NO.4
Toyota Camry Under dash relay


Toyota Camry Underhood Fuse box and relay




----------------------------------

This details will help.
Thanks.

Saturday, July 3, 2010

2001 Lexus ES 300 power mirror fuse and wiring diagram.

Lexus Power Mirror Not Working



There are two fuses. One in the main fuse box located in the engine compartment, and another fuse box behind the coin holder inside the car. You will need to pop-out the coin holder to access that fuse box.

Its a 10A Fuse. There should be only 2 10A fuses there. It also controls the Driver's side memory seat, and the AC, SRS, and some other circuits.

Check Fig Below:

There should be a diagram under the hood

Dashboard Fuse Box Location For Lexus 300



under hood engine compartment fuse box for lexus 300




Problem Solved:
To Know How the problem Solved Click here






@