Chevy impala lower ball joint replacing and other repairs?

The stock lower ball joint is a press fit piece, which means you need a big hammer to get it out and the proper tools to get it back in. Once removed, Matt slid the new ball joint in place and began pressing it in the lower A-arm.

Right click on the image and select option "open image in new web" if the image is not seen full or its very small to see.-----------

With the tie rod out of the way, Matt was ready to remove the front sway bar. the sway bar endlinks once. To remove the sway bar, remove the endlinks and then unbolt the sway bar mounts from the frame.

The lower ball joint pressed in:---