The details are as follows :---------
To install:
The car will not start?
Car will not crank?
Car has no spark?
How to troubleshoot car battery?
How to test starter solenoid?
http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html
--------------------
How to test cars starter?
http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html
How to replace starter in car?
car will turn over but will not start?
Car wont start?
Intake Manifold
REMOVAL & INSTALLATION
See Figure 1
- Remove the air intake connector.
- Disconnect and tag all wires, harnesses, coolant and vacuum hoses from the intake manifold.
- Disconnect the shift and accelerator cables.
- Remove the fuel pipes.
- Remove the distributor and EGR valve.
- Remove the PCV hose.
- Remove the water outlet, by-pass pipe and gasket from the manifold.
- Disconnect the water hose form the water pump and remove the bolt holding the water by-pass pipe and timing chain case.
- Remove the intake manifold stays.
- Remove the 2 nuts and 4 bolts and extract the intake manifold with gasket. Remove the cylinder block insulators.
To install:
- Position the cylinder block insulator on the cylinder head.
- Position a new gasket on the cylinder head and install the intake manifold with the 2 nuts and 4 bolts. Tighten the fasteners to 15 ft. lbs. (21 Nm). Use a crisscross pattern starting from the center and work outwards.
- Install the intake manifold stays and secure to 27 ft. lbs. (37 Nm) to the block and 13 ft. lbs. (18 Nm) to the intake manifold.
- Install the bolt holding the water by-pass pipe and timing chain case and tighten to 13 ft. lbs. (18 Nm). Connect the water hose to the water pump.
- Install the delivery pipe, water outlet and EGR valve.
- Install the distributor.
- Connect all wires, connectors, coolant and vacuum hoses from the intake manifold.
- Connect the shift and accelerator cables.
- Install the air intake connector.
- Fill and bleed the cooling system.
- Start the engine and check for leaks.
This basic details will help.Thanks.
------------------
If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.
For more car related problem troubleshooting:---
This are the sections, you can go through and click the link to read its troubleshooting.
---------
The car will not start?
-----------------
Car will not crank?
-----------
Car has no spark?
-------------
How to troubleshoot car battery?
-----------------
How to test starter solenoid?
http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html
--------------------
How to test cars starter?
http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html
How to replace starter in car?
-----------
car will turn over but will not start?
-----------------
Car wont start?
----------