Volkswagen Passat Door will Not Open?

2002 VW Passat Driver side door will not open.

PROBLEM:---
Tried both inside and outside,but door will not open.
Central locking switch tested ok.All other doors work fine.
Tries manually with key but door will not open.

TROUBLESHOOTING:---

There are few things to be tried to take care of these issue.

1. First  try  reset procedure.For that you need to disconnect the battery for 10 mins and then re connect like rebooting a computer.Then see is the drivers door started opening. 
2. If this does not work then operate the key fob lock and unlock while banging edge of door below door handle on drivers door.As the door latch sits there.Try and free off door latch then try and open door.Try this step few times.
3. But if this doesn't work.Then its issue with door latch.To confirm these you need to go inside car and remove the door panel from the inside and then remove the window carrier from inside to gain access to the door latch from inside the door.

Sometimes  you may even have to break the door latch apart to get it to release from the body of the car, its quite common for the door latches to fail in the safe position and give the issues that you have.

 Its the process that professional mechanics try  and get into the car on that door.

Not always but if you have to use last option then there is a possibility that some damage may occur in the process of obtaining entry to the door.But on some cases only the parts gets slight damage.Do it slowly and gently.

These details will help.

Thanks.

Users Who Viewed This Problem Also Viewed:

2004 Volkswagen Polo: OSR Door will not Open?

http://whatisbyme.blogspot.in/2012/05/2004-volkswagen-polo-osr-door-will-not.html

1998 Toyota LandCruiser: Driver Door will not lock or unlock with Key or Remote?

http://whatisbyme.blogspot.in/2012/05/1998-toyota-landcruiser-driver-door.html

2009 Toyota Tundra: Driver side door will not lock or unlock with Remote?

http://technoanswers.blogspot.in/2012/04/2009-toyota-tundra-driver-side-door.html

2004 Chevy Colorado Passenger side door will not Unlock?

http://schematicsdiagram.blogspot.in/2012/04/2004-chevy-colorado-passenger-side-door.html

Car door will not close? 
http://howtobyme.blogspot.com/2011/11/car-door-will-not-close.html 

All power door locks not working on Honda Accord? 
http://howtobyme.blogspot.com/2011/11/all-power-door-locks-not-working-on_14.html

How to replace door lock switch on Chevrolet silverado?

Click this link to see video:---

http://www.youtube.com/watch?v=KiyX4DJFpao

Replacing a faulty Door Lock Switch:--

It must be the switch.

Click this bar to view the original image of 800x533px.

Tools required is a Wide blade slotted screwdriver and 2 small slotted screwdrivers
A 10mm 1/4 drive socket

Click this bar to view the original image of 800x533px.

After receiving the switch from the dealership. I compared it with the one in my truck.

Click this bar to view the original image of 800x533px.

First step. Pry the door handle cover off with a wide blade slotted screwdriver.
With some upward force, begin to gently twist the screwdriver to pry the cover off.

Click this bar to view the original image of 800x533px.

Here is what they look like. Take extra care. the mounting tab can easily break.

Click this bar to view the original image of 800x533px.

Click this bar to view the original image of 800x533px.

With the door handle cover off you can remove the top and bottom bolts with the 10mm socket

Click this bar to view the original image of 800x533px.

With door handle gone. Now you can pry the door console up to gain access to the wiring harnesses.

Click this bar to view the original image of 800x533px.

Click this bar to view the original image of 800x533px.

Again, I compare the new with the old.

Click this bar to view the original image of 800x533px.

Click this bar to view the original image of 800x533px.

Very important Note the tabs on the side of the switch.

Click this bar to view the original image of 799x531px.

Using you sharpest and thinnest flat blade screwdriver and spread the sides to allow clearance for the switch to come out.
Don't pry it out, insert the scrwdvrs then lift the switch out of it's home.

Click this bar to view the original image of 800x533px.

While Unlock the wiring harness plug, lift the plug from the switch.

Click this bar to view the original image of 800x533px.

Plug the harness into the new switch.
Before installing the switch into it's home... Test it.
Then snap it into it's home.
YOUR DONE. Reassemble

Click this bar to view the original image of 800x533px.

To replace outer door handle on a chevy silverado
you have to take the entire door skin off,arm rest,switches,etc.remember how you took everything apart so as put everything back again the handle has basically to bolts holding it in place one outer side of door edge,above the Vin number,sticker on the door,the other you will see when you take apart the door it will be exposed,you'll have to physically look inside the door at the handle itself,take it out and the handle practically off,using medium sized flat head screw driver,pry the pin that connects the from the door(i forget what this things is called,the part that latches or actually grabs onto the door striker)to the handle base,theres another one you may or may not be able to see at first but as you start to remove the handle from the door it will become looser and you should see it from under the handel outer door,pry it loose

-----------

Chevy Silverado power door locks consist of two door lock switches and two door lock actuators, with one of each in both doors. If the entire power lock system fails at once, you possibly have a blown fuse. Otherwise, the lock problem will reside in the switch of actuator.

Close the Silverado's windows. Pry the power lock switch plate out of the Silverado's door panel with the trim tool. Turn the plate over to access and disconnect the wiring harness from the base of the switch.Remove the hex-head screws that hold the door panel to the Silverado's door using the socket set. Lift the door panel up until the top of it clears the window channel and then remove it from the door by hand.Locate the Silverado's door lock actuator by following the door latch rod from the latch to the actuator. Grab the wiring connector where it plugs into the actuator and unplug it.Remove the hex head screw that holds the actuator to the Silverado's door using the socket set. Turn the actuator to remove the latch rod end from the hole in the actuator plunger. Take the actuator out of the door.Hook the new actuator to the latch rod by hand. Bolt the actuator to the Silverado's door with the socket set. Plug the wiring into the actuator by hand.Reinstall the Silverado's door panel by reversing your removal method. Replace the door lock switch, if necessary, by pushing it out of the plate and inserting a new one before reinstalling the switch plate.

How to disassemble viking electric double oven model VEDO207CSS

Viking electric double oven Disassembly

This is diagram of Cabinet parts:---

Diagram # Part name

28 Cabinet top

29 Cabinet side panel

30 Control compartment l.h.

31 Upper back cabinet

32 Control compartment r.h.

33 Lower oven flue box

34 Rear insulation retainer

35 Upper oven top

36 Upper oven flue box

37 Lower oven vent tube

38 Fan switch

39 Lower oven limit switch

40 Switch plate

41 Rear support

42 Side insulation retainer

43 Lower back cabinet

44 Lower oven channel

45 Screw (#8-18)

46 Door spring retainer

47 Oven bottom

48 Base runner

49 Lower oven top

50 Upper oven liner

50A Lower oven liner

51 Side trim r.h.

52 Smoke eliminator

53 Upper oven bottom

54 Bottom trim

55 Oven lamp lens

56 Oven bulb

57 Oven bulb (40 watt appliance)

58 Side trim l.h.

59 Latch handle guide

60 Center trim

61 Front support

62 Hinge assembly

63 Oven door spring

64 Black trim screw

65 Upper latch handle guide

66 Control panel bottom trim

66A Control panel trim insert

67 Conduit assembly

68 Lower side shield

69 Upper side cabinet

This diagram is for door latch parts disassembly:---

Diagram # Part name

1 Lock switch

2 Momentary switch

3 Switch mounting screw

4 Insulator (esm)

5 Handle mounting screw

6 Latch handle (bk, wh)

7 Latch arm

8 Screw

9 Screw

10 Kep nut

11 Door lock

12 Brass screw

13 Kep nut

14 Solenoid

15 Door latch bracket

16 Screw

This diagram is for door disassembly :---

Diagram # Part name

0 Upper door, complete assembly (al, bk, bu, fg, ...

0 Lower door, complete assembly (al, bk, bu, fg, ...

1 Door handle (br, ss)

2 Door handle bracket chrome

2A Door handle bracket brass

3 Lower door panel (bk, ss, wh)

3A Lower door panel (al, bu, fg, pl, te, vb)

3B Upper door panel (bk, ss, wh)

3C Upper door panel (al, bu, fg, pl, te, vb)

4 Glass, window

5 Inner baffle

6 Door handle washer mtg. 3/4 x 5/16

7 Trim "j" molding chrome

7A Trim "j" molding brass

8 Door glass

9 Handle mounting screw

10 Door liner

11 Door panel screw

12 Latch plate

13 Latch plate screw

14 Plug insulation

15 Door gasket

16 Door pad

17 Plug mounting screw

18 Door glass retainer

19 Logo black/chrome

19A Logo burgundy/chrome

19B Logo forest green/chrome

19C Logo plum/chrome

19D Logo teal/chrome

19E Logo viking blue/chrome

19F Logo white/chrome

19G Logo black/brass

19H Logo white/brass

20 Door liner insulation

21 Insulation plate

22 Plate mounting screw

23 Logo clip

24 Door panel kep nut

25 Door panel screw

26 Baffle mounting screw

27 Bracket mounting screw

This diagram is for oven control panel parts:---

Diagram # Part name

1 Control mounting bracket

2 Electronic timer

3 Timer mounting bracket

4 Control panel top trim

5 Vent grill

6 Selector knob (bk, wh)

7 Control panel (bk, ss, wh)

8 Control panel bottom trim

9 Thermostat knob (bk, wh)

10 Clock knob (bk, wh)

11 Set button knob (bk, wh)

12 Oven light knob (bk, wh)

13 Terminal bushing, 2-pole

14 Lower oven light switch

15 Indicator light (ss only)

15A Indicator light (color models only)

16 Thermostat

17 Upper oven light switch

18 Selector switch (7-position)

19 Thermostat

20 Latch handle guide

21 Switch mounting bracket

22 Control panel bottom trim insert

23 Knob bezel chrome

23A Knob bezel brass

24 Shaft, bit generator (bk, wh)

25 Clock lens glass

26 Clock window bezel

27 Bezel nut

28 Indicator light bracket

29 Time manual knob (bk, wh)

30 Time manual switch